1. Home
  2. Products
  3. Dental Treatment Unit
  4. TJ2688A1 Dental Treatment Unit

TJ2688A1 Dental Treatment Unit

Technical Parameters
Voltage: 110v 60hz or 220v 50hz
Air pressure: >0.55mpa
Water pressure: 0.2mpa-0.4mpa
Lowest position of chair: 440mm
Highest position of chair: 860mm
Minimum angel of backrest: 5°
Maximum angel of backrest: 85°
Packing size: 136x112x93cm
Gross weight: 210kg
Net weight: 200kg

Standard configuration

Top-mounted instrument tray(bottom-mounted instrument tray is optional)
Inside the instrument tray, all the pipelines adopt acid and alkali resistant water pipes and air pipes, of which the normal service life reach up to 3 years. With five fixed instrument holders, it can satisfy various surgical needs of the dentist.
The handpiece rack of the instrument tray is designed with a balanced sense, height and inclination suiting to place instruments, in order that the dentist can conveniently replace tools during dental surgery.
The instrument tray adopts 40×70mm size design, in order to maximize the room for dentist to place surgical supplies and tools.

Adjustable pillow
The adjustable pillow makes it possible for patients to adjust their head easily.
Realize ergonomic design so as to ensure patients stay comfortable during the treatment process.

Automatic thermostatic water supply system
The system guarantees the patients a more comfortable experience rather than cold water stimulation.

Handpiece tubing with standard fittings (3 sets)
It is used to place the spare handpiece during operation, in order to prevent the handpiece arbitrarily placed on table from pollution.

Three way syringe (one for hot water, one for cold water)
The three way syringe adopts stainless steel detachable nozzle with high temperature and high pressure disinfection, and the water in which can also be filtered to guarantee safety and no pollution.

Water suction and saliva ejector
The strong and weak water suction and saliva ejector will be used according to different conditions, which can get rid of the saliva produced by the patient in the treatment and make it convenient for later operation.

The water suction and saliva ejector weights less than 200g so that it is lightweight and portable.

The spittoon made of ceramic material, has smooth surface and is easy to clean, in order to remove blood and oil stains as well as disinfect.

The spittoon can rotate 180°, which makes it easy for the patient to use directly in the chair without having to get up, as well as for the dentist to clean the instruments in time.

Built-in water purified system with bottle
High temperature disinfection, safe and sterile.

Strong and weak dual-purpose LED cold lamp (1 set)
The strong and weak dual-purpose LED cold lamp has two levels of lights to adapt to different treatment environment, the LED lamp on which produces less heat but has wide range of lighting that the whole dental equipment could be lightened.

Low-tension X-film viewer (1 set)
Voltage 24V, and the low-tension X-film viewer adopts energy-saving LED light source so that it has a long service life.

Spirit lock tight equilibrium device

Chair for the dentist (1 set)

The surface material is leather, in case the dentist slides down during operation. The chair can rotate 360°, convenient for getting instruments or cleaning tools. With five stable casters and backrests, it can ensure the dentist keep upright in the treatment.

Simple foot switch (1 set)
The dentist is able to adjust the patient' chair through the simple foot switch, while his hand is free so that he can focus on the treatment.

Besides, it is more hygienic to prevent the dentist from touching the button.

The button of the foot switch is designed with reasonable area, and it is not too small to operate with easily, nor too large to waste space.

Simple key board
Each key in the board is designed raised.
Different keys is marked with simple patterns to identify its function.
Common keys lie in conspicuous positions, convenient for the dentist to operate with.
The key board is designed with seat lift control button, backrest up-down control button, rinsing mug quantitative water button, spittoon water button as well as constant temperature heating water button, to facilitate the operation of the entire treatment process.

Optional configuration

Bottom-mounted instrument tray (1 set)
The dentist can choose top-mounted or bottom-mounted instrument tray according to their own operation habits.

High-speed air driven handpieces (2 sets)
The handpiece is easy to hold since its body adopts humanized grip design, and its surface is of corrosion resistance.
Stable operation, high-speed rotation without vibration.

Low speed air motor handpiece (1 set)

Made of stainless steel, it is easy for cleaning and maintenance.

Fiber optic high speed turbine handpiece (2 sets)
The fiber optic high speed turbine handpiece is designed with water spray to reduce the high temperature generated in the treatment process in time, which can improve the work efficiency.
With high temperature and high pressure resistance, it will not be deformed due to high temperature or high pressure.
Stable body and low noise.

Built-in LED curing light (1 set)
The LED curing light is a dental device for repairing teeth, which can be used to fill the tooth cavity or bond the alveolus.

Built-in ultrasonic scaler (1 set)
The ultrasonic scaler can not only clean away such dirt as plaque, tartar and stains on the tooth surface to make teeth white, but also effectively prevent such oral diseases as bad breath, root bleeding, periodontal disease and dental caries from occurring. In addition, the built-in design makes sure the instrument will not be contaminated.

Endoscope equipment (1 set)
The endoscope equipment is used to help the patients understand their own conditions and treatment effect, convenient for communicating with the dentist.

nd dental caries from occurring. In addition, the built-in design makes sure the instrument will not be contaminated.

Dental vacuum pump (1 set)

The vacuum pump is made of aluminum alloy in order to reduce its weight. Our company supplies the vacuum pump suitable for one to eight dental chairs.

Inquiry Form
Other products